Before replacing a brass faucet cartridge, it's important to first remove the handle. A fastening screw holds the handle and the cartridge in place. Use a flat-blade screwdriver to pry the clip out of the retention slot. Once the clip is out, use needle-nose pliers to pry the pin from the stem. Then, place the cartridge parts in order of removal. Once the handles are removed, replace the Brass Faucet Cap and Cartridge.

To install a new Brass Faucet Cartridge, first unscrew the retaining clip and turn the handle counterclockwise. This will release the cartridge. Then, reinstall the retainer clip by pushing the tabs down into the retaining clip. If the retainer clip is not seated properly, twist the tabs and push the nut back into the slot. Then, replace the handle and the Brass Faucet Cartridge.

If you have an older faucet, you may want to replace the cartridge and the stem together. To do this, you will need a plastic tool that will loosen the cartridge. Once the pliers are free, grab the stem of the cartridge and pull it out of the faucet body. Some water may come out of the faucet during the process, so be careful. To prevent this, you may need to purchase a Brass Faucet Cartridge Puller.

You may need to remove the cartridge to replace it. You may also need to replace the retaining clip if it's not secured well. A good way to determine the correct retaining clip is to check it with the retaining clip of the faucet. Once the retainer clip is properly seated, you can put the Brass Faucet Cartridge back into the handle. You may have to twist the tabs several times in order to fully seat the retainer clip. To fully seat the retainer clip, you can use a white plastic tool.

A Brass Faucet Cartridge is a simple and inexpensive repair. It can be replaced at home or by a professional. You can buy a cartridge puller for the retaining clip or a cartridge puller for the cartridge. Then, you can replace the cartridge as needed. You can also clean the housing and the stem with a clean cloth and a rag. A brass faucet with a new cartridge can last for several years.

To replace a cartridge, you must first remove the retaining clip. It will slide into the retaining clip and hold the cartridge in place. If the retainer clip is stuck, you can twist the tabs with the plastic puller. Then, place the new cartridge into the faucet body. Ensure that the seal is properly sealed before inserting the new one. Then, use the appropriate cleaning materials. If you've already removed the retainer clip, you can put the new one into the retaining clip.