How to clean stains on stainless steel faucets- Zhejiang Hongming Plumbing Technology Co, Ltd

Stainless steel faucets are installed in almost every household. For a thing, if it is used for a long time, it will be very dirty if we don't clean it. Therefore, even if it is a stainless steel faucet, we must pay attention to cleaning it. How to clean the scale on the stainless steel faucet? Do we understand other stain cleaning methods?

1. How to clean the mist and hair on the surface of stainless steel faucet pipe fittings

The stainless steel faucet fittings appear foggy or hairy during long-term use because the scale is attached to the surface of the metal, so our task is to remove the scale.

Cleaning method: First, squeeze a little toothpaste on the stainless steel faucet, then gently scrub with a toothbrush, rinse with water, polish with an unnecessary old stocking, and then use orange peel on the metal surface (because the orange The skin contains fruit acid to maintain the stainless steel jewelry) to make it bright as new.

2. How to clean the watermark on the stainless steel faucet

Slight scale: Dip a cloth with detergent, detergent, detergent, soap and other cleaning agents to wipe the faucet, and rinse it with water.

More limescale: soak a rag with white vinegar and apply it to the faucet for ten minutes.

The stainless steel faucet can be wiped with toothpaste to add light; the colored faucet should be wiped with a dry cloth; the retractable faucet should be flexed and turned gently to avoid the hose being broken and broken.

If the amount of water flowing out of the faucet is small, it means that there is debris in the filter of the faucet outlet, which is mostly caused by the accumulation of scale. The filter can be removed, soaked in hot water with white vinegar, rinsed with clean water and then installed back to improve. Showers usually produce a lot of water, and similar situations are prone to occur. Some showers have soft silica gel inside, so you can rub them with your hands after opening them.

3.How to remove the rust on the stainless steel faucet

Nowadays, some stainless steel faucets will rust after a long time. In this situation, we can use potato peels to remove rust spots.

Cleaning method:

Use the peeled potato skin and meat side to repeatedly scrub the surface of the stainless steel faucet, and then wash it with clean water.

If you don’t have potatoes, you can also use white radish skins. The same method of scrubbing the stainless steel faucet can also achieve the same rust removal effect!

You can also prepare salt and vinegar, mix the salt and vinegar together, stir, let the salt be fully diluted in the vinegar, and then heat it. After heating, use an absorbent sponge or rag to fill the liquid, and then put it in Cover the rusty area for 20-30 minutes. After half an hour has passed, use a rough cloth dipped in salt and vinegar mixture and scrub vigorously to easily remove the stubborn rust.

If you use a soft cloth and toothpaste method, please pay attention to the degree of force, be careful that the toothpaste will grind out small marks on your precious faucet. It is best to use the current crystal toothpaste.

We all need to clean the scale or other dirty things on the stainless steel faucet in time. Otherwise, there will be more and more stains, and it will be difficult to clean at that time. In fact, it is not only the cleaning of stainless steel faucets, we must clean the things in the kitchen in time.