Types of Plumbing Fittings

Plumbing Fittings are parts of a system that connect two pipes or tubes together. Most often they are used as a drainage access point. These plumbing parts feature 45deg branch lines that maintain a smooth flow. Here are some examples of the different types of plumbing fittings. In addition to standard elbows, there are also adapters, reducers, and tees. Listed below are some of the most common types.

Tee type plumbing fittings. These are typically male threaded and have one inlet and two outlets. They have two threads on one end and are designed to screw into each other. Tee fittings can be either equal or unequal, and they come in a variety of materials and sizes. Some types are more flexible than others, and may have threads on the inside. In any case, you must follow the manufacturer's instructions when installing these parts.

Copper and iron are dissimilar metals and when they are in contact, they cause corrosion. Copper and iron plumbing fittings are made of various materials, including plastic, brass, copper, and iron. Each type of fitting has a different function, and a plumbing fitting can also be made of a combination of different materials. 90deg elbows and 45deg elbows are examples of these fittings. 90deg elbows and 45deg elbows are examples of offsets. Cross joints, or Y-joints, are other examples.

One of the most common plumbing fittings is the elbow. This piece is used to change the direction of water. It is usually used under a drain and is a great way to regulate the speed at which water exits the fixture. The elbow can have socketed or butt-welded ends or be threaded. There are also variations of the elbow called "street elbows."

There are many different types of elbows and tees. Elbows come in many different sizes, so there's one to fit your needs. If you're connecting two different types of pipes, you may want to consider a nipple. These fittings are male or female and generally contain female threads. Usually, the plug is removable, but you can sometimes find a female version of them for smaller pipe diameters.

Push-in plumbing fittings are another common type. These fittings are easy to use and fit into a tee, but they require a square-cut pipe end. They also feature a collet and toothed ring arrangement. They are great for small spaces because they're easy to insert and remove, and they can be disassembled by hand. When disassembling these fittings, be sure to use a special key.

Pipes can be connected by means of a tee or a flare fitting. Flare fittings are used on high-pressure systems, such as gas lines. The flare makes a connection after the pipe is flared. Compression fittings, on the other hand, have a threaded body, a nut, and a sleeve, called a ferrule. These are used to connect pipes of different heights.